I have been using WSFTP for a couple of years and now have to change to a new ftp client. I really like coreftp, but am having a problem setting it up.
When I put the remote site of 'da.fmshrp' for the Remote Start Folder it will come back with an error of 550 No Data Set Found. If I take out that entry and put the command CWD 'da.fmshrp' under Post login commands it works. My remote site will always start up.
I also can not just type in 'da.fmshrp' on the remote side.
Thoughts on what I am doing wrong?
THANKS!!
Remote Site Error
-
mdemoss777
- Posts: 7
- Joined: Wed Sep 22, 2004 3:11 pm
-
mdemoss777
- Posts: 7
- Joined: Wed Sep 22, 2004 3:11 pm
-
mdemoss777
- Posts: 7
- Joined: Wed Sep 22, 2004 3:11 pm
The Server Type is Auto. I tried MVS, but still got the same errors. (In WSFTP we selected IBM/MVS)
Below is the error log I get. Thought it might help. What I find strange is, if you type in the command CWD 'da.fmshrp' at Post Login commands it will take you to the correct directory. Strange...
WinSock 2.0
Mem -- 784,372 KB, Virt -- 2,097,024 KB
Started on Monday February 07, 2005 at 12:49:PM
Resolving mvs1.da.state.ks.us...
Connect socket #360 to 165.201.25.2, port 21...
220-FTPD1 IBM FTP CS V1R4 at MVS1.DA.STATE.KS.US, 18:49:58 on 2005-02-07.
220 Connection will close if idle for more than 5 minutes.
USER dapecmw
331 Send password please.
PASS **********
230 DAPECMW is logged on. Working directory is “DAPECMW.”.
SYST
215 MVS is the operating system of this server. FTP Server is running on z/OS.
Keep alive off...
PWD
257 "'DAPECMW.'" is working directory.
CWD 'DAPECMW.'/
501 Mismatched quotes on directory name “DAPECMW.'/".
257 "'DAPECMW.'" is working directory.
PASV
227 Entering Passive Mode (165,201,25,2,8,16)
LIST –al
Connect socket #400 to 165.201.25.2, port 2064...
550 No data sets found.
QUIT
221 Quit command received. Goodbye.
At the end I will get a pop up that asks if I want to try the directory listing in the opposite mode. Doesn't matter what I choose it still will not go to the correct directory listing.
Below is the error log I get. Thought it might help. What I find strange is, if you type in the command CWD 'da.fmshrp' at Post Login commands it will take you to the correct directory. Strange...
WinSock 2.0
Mem -- 784,372 KB, Virt -- 2,097,024 KB
Started on Monday February 07, 2005 at 12:49:PM
Resolving mvs1.da.state.ks.us...
Connect socket #360 to 165.201.25.2, port 21...
220-FTPD1 IBM FTP CS V1R4 at MVS1.DA.STATE.KS.US, 18:49:58 on 2005-02-07.
220 Connection will close if idle for more than 5 minutes.
USER dapecmw
331 Send password please.
PASS **********
230 DAPECMW is logged on. Working directory is “DAPECMW.”.
SYST
215 MVS is the operating system of this server. FTP Server is running on z/OS.
Keep alive off...
PWD
257 "'DAPECMW.'" is working directory.
CWD 'DAPECMW.'/
501 Mismatched quotes on directory name “DAPECMW.'/".
257 "'DAPECMW.'" is working directory.
PASV
227 Entering Passive Mode (165,201,25,2,8,16)
LIST –al
Connect socket #400 to 165.201.25.2, port 2064...
550 No data sets found.
QUIT
221 Quit command received. Goodbye.
At the end I will get a pop up that asks if I want to try the directory listing in the opposite mode. Doesn't matter what I choose it still will not go to the correct directory listing.