Core FTP

Hi all,

we are using Core FTP Server 2.0, build 637, 64bit.
The server is running on a dedicated machine, 24/7, with a large number of logins/logouts (every few seconds), but little file transfer activity.
We are observing server crashes every few days.
The last line in the log file is "winsock error 10053", the previous lines are just showing the regular FTP activities, but no error indication at all.
We are noticing this issue already since several software versions.
See below for the information found in the Windows event log.
Is there any way to generate additional debug information ?

Best regards

Elmar


Fault bucket 610066554, type 28
Event Name: APPCRASH
Response: Not available
Cab Id: 0

Problem signature:
P1: coresrvr.exe
P2: 2.0.0.0
P3: 59efdabe
P4: coresrvr.exe
P5: 2.0.0.0
P6: 59efdabe
P7: c0000005
P8: 0000000000048d64
P9:
P10:

Attached files:
C:\Users\elmar.daegele\AppData\Local\Temp\WER8566.tmp.WERInternalMetadata.xml
C:\Users\elmar.daegele\AppData\Local\Temp\WER911A.tmp.appcompat.txt
C:\Users\elmar.daegele\AppData\Local\Temp\WER91C7.tmp.mdmp

These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_coresrvr.exe_eb62c1c967273149ac826b86b22e2a39a29390_41d71139

Analysis symbol:
Rechecking for solution: 0
Report Id: c0fe4348-c31d-11e7-bb1b-000c29451233
Report Status: 9

Make sure your "max conns per IP" is set at only the maximum you require (anything more than 5 is questionable).

if there is a coredump.log in the installation or %temp%, send it in to feedback

Build 642 and greater should resolve this issue.

We're having the same issue with 2.0, build 668, 64-bit. Core FTP server process (not the one started via service, but the other one) crashes every now and then.